Supero SUPER 370DDE, User Manual

Page: 103 / 171

5-23
Chapter 5: The FastTrak 100 RIAD Card (370DDE)
11. Under [Select Drive for Rebuild], highlight the replacement drive.
12. Press [Enter] and confirm that the data will be copied on to the
selected drive. All data on the replacement drive will be written over
with mirrored information from the array drive. A progress bar will
appear as below.
13. Once the rebuild process is complete, the user will be asked to
reboot the system.
Viewing Controller Settings
The Controller Configuration <6> menu selection allows you to enable
or disable the FastTrak100 BIOS from halting (the default) if it detects
an error on boot up. You may also view the system resources (Interrupt
and I/O port address) of FastTrak’s data channels.
Halting FastTrak BIOS On Bootup Errors
The [Adapter Configuration – Options] section allows you to enable or
disable FastTrak100 to Halt operation at the BIOS startup screen
should an error be detected. This is the only option that can be
changed on this screen.
Viewing FastTrak System Resources
The [System Resources Configuration] section of this submenu
displays the PCI slot interrupt and port address used by the
FastTrak100. The resources used are determined by the Mainboard
PCI PnP BIOS for the PCI slot in which the FastTrak100 resides.
In the rare case that there is a resource conflict, refer to the Mainboard
BIOS documentation on changes on resources allocated to the
FastTrak100 PCI slot.
Please Wait While Duplicating The Image
10% Complete
FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
[ Adapter Configuration - Options ]
Halt On Error: Enable
[ System Resources Configuration ]
Channel 1 (IDE1)
Interrupt : A I/O Port : FFF0
Channel 2 (IDE2) Interrupt : A I/O Port : FFA8
[ Keys Available ]
[
←
,
→
, Space] Change Option [ESC] Exit