Supero SUPER 370DDE, User Manual

Page: 65 / 171

Chapter 4: Award BIOS
4-13
BIOS
[IR Transmission Delay]
If "Enabled", the transmssion of IR (Infra-Red) Signals will be delayed. The
settings are "Enabled" and "Disabled." The default setting is "Enabled."
[UR2 Duplex Mode]
The option set the mode for the UR2 Duplex Mode. The settings are "Full"
and "Half." The default setting is "Half."
[Use IR Pins]
This item sets the mode for Use IR Pins. The settings are "RxD2, TxD2" and
"IR-Rx2Tx2." The default setting is "IR-Rx2Tx2."
[Onboard Parallel Port]
This option allows the user to set the address and the corresponding IRQ
for the onboard Parallel port. The settings are "Disabled" , "378/IRQ7",
"278/IRQ5", and "3BC/IRQ7." The default setting for the Parallel Port1 is
"378/IRQ7."
[Parallel Port Mode]
This option set the mode for the onboard Parallel port. The settings are
"SPP" , "EPP", "ECP", and "ECP+EPP." The default setting is "ECP."
[EPP Mode Select]
This option allows the user to select the EPP mode. The settings are "EPP
1.9" and "EPP 1.7." The default setting is "EPP 1.7 ."
[ECP Mode Use DMA]
This option allows the user to select the ECP use DMA mode. The settings
are "1" and "3." The default setting is "3 ."
[Game Port Address]
This option allows the user to set the Game Port address. The settings
are "Disabled", "201" and "209." The default setting is "201 ."