Supero SUPER 370DDE, User Manual

Page: 88 / 171

5-8
S
UPER 370DDE/370SDA User's Manual
Troubleshooting
FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
[Auto Setup Options Menu]
Optimize Array for: Performance
Typical Application usage: A/V Editing
[ Auto Setup Configuration ]
Mode...........................Stripe
Drives used in Array .......... 2
Array Disk Capacity ... 16126
[ Keys Available ]
[
↑
] Up [
↓
] Down [
←
,
→
, Space] Change Option [ESC] Exit
[Ctrl-Y] Save
NOTE: If you wish to customize certain settings at a later time, you may
do so by manually creating your array (see page Error! Bookmark not
defined. in Using FastBuild Configuration Utility).
Creating an Array for Performance
NOTE: FastTrak100 allows users to create striped arrays with 1, 2, 3, or
4 drives.
To create an array for best performance, follow these steps:
1. Using the Spacebar, choose “Performance” under the Optimize
Array for section.
2. Select how you will use your PC most under the Typical Applica-
tion usage section The choices are A/V Editing, Server, and
Desktop (the default).
3. Press <Ctrl-Y> keys to Save and create the array.
4. Reboot your system.
5. Once the array has been created, you will need to FDISK and
format the array as if it were a new single hard drive.
6. Proceed to Installing Drivers section of the manual (see page 5-24).