Supero SUPER 370DDE, User Manual

Page: 120 / 171

5-40
S
UPER 370DDE/370SDA User's Manual
Troubleshooting
5. A progress bar will appear at the bottom of the FastCheck Monitor-
ing window showing synchronization in progress and the percent-
age that has been completed.
Rebuilding An Array
This command effectively copies or overwrites data from an existing data
drive in the array on to a blank drive. The operation will be typically used
when a failed drive has been replaced with a new drive as part of a mirrored
array.
1. To perform a Rebuild, choose the Array Tab View.
2. Right click the array number and choose Rebuild from the context
menu.
3. Once Rebuild is selected, you will be asked to “Initialize Rebuild
process on Array #” by clicking OK.
Using Rebuild Wizard
1. Initiating rebuild array will open the Rebuild Wizard Step 1 screen
shown below.
2. Select the Target drive which will receive data. Make sure you
select the blank new or replacement drive. The unselected drive will
contain “good” data. It will be the remaining working drive of an
array, or a system drive containing existing data that you wish to
mirror.