Supero SUPER 370DDE, User Manual

Page: 128 / 171

5-48
S
UPER 370DDE/370SDA User's Manual
Troubleshooting
On Errors section offers four radio button choices for the user to
select what procedure they would like to perform if an Error is
detected during automatic/manual Rebuilds or manual Syn-
chronization. There are three types of errors that FastTrak100
detects — a data mismatch between the primary and second-
ary drive, a physical media error on source or target drive, or a
total disk failure. The options for handling Errors are as follows:
Abort: stops any Synchronization or Rebuild process if an
error is encountered.
Fix: in most cases, FastTrak100 automatically can correct
errors. The method of correction varies depending on the
type of error.
Ignore: FastTrak100 will log the event error and continue the
rebuild or synchronization process. Use this setting if you
want to detect the presence of errors, but do not want to fix
these errors at the time. The user may then decide what to
do about the error(s) detected.
Interactive: By checking this option, a selection window will
appear each time an error is detected asking the user
whether they want to Abort, Fix, or Ignore the error (see
Troubleshooting section).
Dismiss Error Dialogs designates the length of time (in seconds)
that a Message box or Error Dialog box appears on screen.
Scheduling Array Synchronization
This section of the Options Window allows a user to schedule when
and how often FastTrak100 will perform synchronization maintenance of
a mirrored array
.
WARNING: This may result in mismatched drives
under RAID 1 or 0+1.