Supero SUPER 370DDE, User Manual

Page: 69 / 171

Chapter 4: Award BIOS
4-17
BIOS
[CPU L2 Cache ECC Check]
Set this option to "Enable" to activate the function of CPU L2 CacheECC
Checking. The settings are "Disabled" and "Enabled." The default setting is
"Enabled."
[CPU Clock Ratio]
This option allows the user to set the CPU Clock Ratio. The settings are "x3",
"x3.5", "x4","x4.5", "x5", "x5.5","x6", and "x6.5." The default setting is
"x3."
4-5 PnP/PCI Configurations
When the Item "PnP/PCI" is highlighted on the main menu bar, hit
the <Enter> key to activate the following screen:
[PNP OS Installed]
Select "Yes" if you are using an operating system that supports the plug and
play solution. Select "No" if you need the BIOS to configure non-boot
devices. The settings are "Yes" and "No." The default setting is"No."
[Reset Configuration Data]
If you have installed a new add-on device and this add-on device has
caused conflicts in system configuration and has resulted in system boot-up
failure, then, select "Enabled" to reset "Extended System Configuration Data"
(ESCD) for the OS to reboot the system. The settings are "Enabled" and
"Disabled." The default setting is"Disabled."