Supero SUPER 370DDE, User Manual

Page: 109 / 171

5-29
Chapter 5: The FastTrak 100 RIAD Card (370DDE)
8. Choose the “Driver” tab in the “Properties” window, and then press the
“Update Driver” button.
9. When asked if you want Windows to search for the driver, choose “Yes
(recommended).”
10. Insert the “FastTrak100 Driver” diskette into the A: drive, then press
“Next.”
11. When Windows informs you that it was unable to find the drivers, press
“Other Locations…”
12. In the “Select Other Location” dialog box, type “A:\WIN95-98”.
13. Press the “Next” button. A message informing you that Windows 95
has found “Win95-98 Promise FastTrak100 (tm) Controller” should
appear.
14. Press “Finish.” (If Windows can’t find the “FastTrak100.MPD” file, type
“A:\WIN95-98” in the “Copy files from:” text box).
15. Choose “Yes” when asked if you wish to restart the system, and
remove the diskette.
Installing Drivers with Existing Windows 95/98
The following three sections detail the installation of FastTrak100 drivers
on a system that has Windows 95/98 already installed. If you’re installing
the FastTrak100 drivers on a system during a Windows 95/98 installation,
see “Installing Drivers During Windows 95/98 Installation” on Page 5-27.
Windows 98
1. After installing the FastTrak100 controller card and configuring the
hard drives, power up the system and boot Windows.
2. The “Add New Hardware Wizard” will appear, informing you that it has
found a “PCI RAID Controller.”
3. Check the “Search for the best driver for your device” box and click the
Next button.
4. Check the “Specify a Location” box and click Next button.
5. Type “A:\WIN95-98” in the text box that appears.
6. Insert the “FastTrak100 Driver” diskette in drive A:.
7. Click on “Next.” The Add New Hardware wizard will say it has found
“Win95-98 Promise FastTrak100 controller”.