Supero SUPER 370DDE, User Manual

Page: 108 / 171

5-28
S
UPER 370DDE/370SDA User's Manual
Troubleshooting
Windows 98
1. After installing the FastTrak100 controller card and configuring the
hard drive(s), partition and format your hard drive(s), if necessary.
2. Install Windows 98 normally.
3. After installation, go the “Start” menu and choose “Settings.”
4. From the “Settings” menu, choose “Control Panel.”
5. In the “Control Panel” window, double-click on the “System” icon.
6. In the “System” window, choose the “Device Manager” tab.
7. In the hierarchical display under “Other Devices” is a listing for “PCI
RAID Controller.” Choose it and then press the “Properties” button.
8. Choose the “Driver” tab in the “Properties” window, choose “Update
Driver,” and then press “Next.”
9. Choose “Search for a better driver than the one your device is using now
(recommended),” then press “Next.”
10. Choose “Specify Location,” and then type “A:\WIN95-98” in the text
box.
11. Insert the “FastTrak100 Driver” diskette into the A: drive.
12. Press the “Next” button. A message informing you that Windows 98
has found “Win95-98 Promise FastTrak100 (tm) Controller” should
appear.
13. Press “Next,” then “Finish,” then “Yes” when asked if you want to
restart your computer. Be sure to remove the diskette from drive A:.
Windows 95
1. After installing the FastTrak100 controller card and configuring the
hard drives, partition and format your hard drive(s), if necessary.
2. Install Windows 95 normally.
3. After installation, go to the “Start” menu and choose “Settings.”
4. From the “Settings” menu, choose “Control Panel.”
5. In the “Control Panel” window, double-click on the “System” icon.
6. In the “System” window, choose the “Device Manager”tab.
7. In the hierarchical display under “Other Devices” is a listing for “PCI
Mass Storage Controller.” Choose it and then press the “Properties”
button.