Supero SUPER 370DDE, User Manual

Page: 145 / 171

5-65
Chapter 5: The FastTrak 100 RIAD Card (370DDE)
Your choices are as follows:
Abort: Halts the rebuild process. You may elect to retry at a
later date.
Break ECC on Target Drive: If the error is detected on the
source drive, “Break ECC on Target Drive” means that
FastTrak will copy the bad data sector on to the target drive
to assure that both drives are identical. If the error is de-
tected on the target drive, FastCheck will copy the data
contained in the good sector of the source drive again to the
target drive.
Skip the Error Block: FastTrak100 will log the event error and
continue the rebuild process. Use this setting if you want to
detect the presence of errors, but do not want to fix these
errors at the time. You may then decide what to do about the
error(s) detected.
ECC Error Reported on Synchronize
The following screen will appear if a data error is detected on either
source or target drive during Synchronize if you have set the On Errors
setting to “Interactive” within FastCheck’s Options Window for Sched-
uled Synchronization (see page 5-48) or for Manual Synchronization
under Notification options (see page 5-46).