Supero SUPER 370DDE, User Manual

Page: 87 / 171

5-7
Chapter 5: The FastTrak 100 RIAD Card (370DDE)
Creating Your Disk Array
You will now use the onboard FastBuild BIOS utility to create your
array using the attached drives. There are three different scenarios in
creating this array. You can create an array for performance, you can
create a Security array using new hard drives (recommended), or you
can create a Security array using an existing hard drive and a new hard
drive.
WARNING: If creating a Security array using an existing hard
drive, backup any necessary data. Failure to follow this accepted PC
practice could result in data loss.
1. Boot your system. If this is the first time you have booted with the
FastTrak100 card and drives installed, the Promise onboard BIOS
will display the following screen.
FastTrak100 (tm) BIOS Version 1.xx (Build xxxx)
(c) 1995-2000 Promise Technology, Inc. All Rights Reserved.
No array defined . . .
Press <Ctrl-F> to enter FastBuild (tm) Utility
Or press <ESC> key to continue booting the system.
2. Press <Ctrl-F> keys to display the FastBuild (tm) Utility Main
Menu
3. Press “1” to display the Auto Setup Menu below. This is the fastest
and easiest method to creating your first array.