Supero SUPER 370DDE, User Manual

Page: 96 / 171

5-16
S
UPER 370DDE/370SDA User's Manual
Troubleshooting
NOTE: For most installations, Promise recommends the <1> Auto Setup
for easy disk array creation.
1. To manually create an array from the Define Array Menu, use the
arrow keys to highlight the array number you wish to define, and
press [Enter] to select.
2. The Define Array Definition Menu will next appear that allows drive
assignments to the disk array.
Selecting Array Type
1. Under the Definition section of this menu, highlight the Array # for
which you want to assign a RAID level.
2. Use the [Space] key to cycle through three array types: Performance
(RAID 0 Striping), Security (RAID 1 Mirroring, RAID 0+1 Striping/
Mirroring (for 4 drives ), or Capacity (Spanning). See page 61 about
RAID levels.
FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
[ Define Array Definition Menu ]
Array No RAID Mode
Total Drv Capacity(MB) Status
Array 1 Stripe 2 16126 Functional
Stripe Block: 64 KB
[ Drive Assignments ]
Channel:ID
Drive Model Capacity (MB) Assignment
1 : Master QUANTUMCR8.4A 8063 Y
1 : Slave QUANTUMCR8.4A 8063 N
2 : Master QUANTUMCR8.4A 8063 Y
[ Keys Available ]
[
↑
] Up [
↓
] Down [ESC] Exit [Space] Select [Ctrl-Y] Save
FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
[Define Array Menu]
Array No RAID Mode Total Drv Capacity(MB) Status
Array 1 Stripe
2 16126 Functional
Array 2 —— —— —— ——
Array 3 —— —— —— ——
Array 4 —— —— —— ——
[ Keys Available ]
Note: * — Bootable Array
[
↑
] Up [
↓
] Down [ESC] Exit [Enter] Select [Space] Change Boot Drive