Supero SUPER 370DDE, User Manual

Page: 117 / 171

5-37
Chapter 5: The FastTrak 100 RIAD Card (370DDE)
Critical: A problem has been detected in the drive and the
drive taken offline as part of a mirroring array. Mirrored arrays
will continue to function without the drive. Fix/replace the
drive that has failed, then restore data from a backup source.
Offline: Drives that are NOT identified as “bad” may be taken
offline if part of a Striping or Spanning array containing a
“bad” drive. These drives do NOT need to be replaced,
however.
S.M.A.R.T. Status: Indicates whether attached hard drive imple-
ments Self-Monitoring Analysis & Reporting Technology to
predict drive failure
Size: Indicates capacity of individual drive
Location: Shows physical location of drive. Indicates on which IDE
channel (1 or 2), and whether drive is Master or Slave on cable.
This allows user to identify drives for removal/replacement.
Mapping: Indicates physical parameters of drive (cylinders, heads,
sectors)
Timing: Shows selection of drive timing (directly related to burst
speed) based on type of drive and cable used.
Using Array Pull-down Menu
At the bottom of the Array window, it indicates to right-click on an
Array to perform synchronization or rebuild operations. Right-clicking
displays the following pull-down menu: