Supero SUPER 370DDE, User Manual

Page: 57 / 171

Chapter 4: Award BIOS
4-5
BIOS
[HaltOn]
This option allows the user to select the situation in which you want the
BIOS to stop the POST process and notify you about the status of the
system. The settings are "All Errors", "No Errors", "All, but Keyboard", "All,
but Diskette", "All, but Disk/Key." The default setting is "All, but Keyboard."
[Base Memory]
This feature displays the amount of conventional memory detected during
boot-up. The default setting for this option is "640K."
[Extended Memory]
This feature displays the amount of extended memory detected during boot-
up. The default setting for this option is "65535K."
[Total Memory]
This feature displays the amount of total memory available in the system The
default setting for this option is "1024K."
[Video]
This option allows the user to select the setting for the default video device.
The settings are "EGA/VGA", "CGA 40", "CGA 80", and "MONO." The default
setting is "EGA/VGA."
[IDE Primary Master UDMA / IDE Primary Slave UDMA /
IDE Secondary Master UDMA / IDE Secondary Slave UDMA]
This option is available only when your IDE hard drive supports Ultra
DMA/33 and the operating environment also includes a DMA drive
(Windows 95 OSR2 or a third-party IDE bus master driver). If your
IDE hard drive and your system software both support Ultra DMA/33,
select "Auto" to enable BIOS support. The settings are "Auto", and
"Disabled". The default setting is "Auto."