69
C. If the function code No. related to the pattern
programming were known, enter three digits of
number, 055. If not, press ENTER
and use
direction key
to move the cursor on “055:
AUTO TRIM”, and then press ENTER
.
O R I G I N N O N E
X : 0 0 0 0 0 A N : 0 0 0 0 0
Y : 0 0 0 0 0 A
F u n c t i o n C o d e ?
< < M a i n M e n u > >
2 . P r o g r a m
3 . B o b b i n W i n d
4 . M a c h i n e T e s t
3-13) Automatic Insertion of Thread Trimmer Code when Deleting Stitches
If the user deletes any section of pattern or the stitches, the user can define whether to insert thread
trimmer code on the related location.
A. Use direction key
to select “2. Program”,
and then press ENTER
.
B. Press code key again on the Operation Box.
D. On the following screen, press “1”to change “0”
to “1”, and then press ENTER
to set
automatic thread trimmer function.
< F u n c t i o n C o d e >
C O D E N O : 0 5 5
0 5 5 : A U T O T R I M
T R I M : 1 [ 0 / 1 ]
< Pattern Design >
< Deleted Stitches or Pattern (Before Setting-Up
Automatic Insertion of Thread Trimmer >
< After Setting-Up Automatic Insertion of Thread Trimmer >
