65
0 1 4 : P T R N R E A D
N O : 0 0 1
D. After pressing READ key, input the pattern
number to insert condensed sewing stitch by
using digit key and read in the pattern by
pressing ENTER
ey. (For example, input
[0][0][1] to read the pattern number 001.)
C U R V E
X : - 0 0 6 0 A N : 0 0 0 4 0
Y : 0 0 0 3 9 A
F u n c t i o n C o d e ?
E. Go to pattern data end location by using
FORW and BACK key.
< F u n c t i o n C o d e >
0 4 1 : C N D N S S T I <
0 4 2 : O V L A P S T I
0 4 3 : S Y M M E T R Y X
F. After pressing CODE key, if you know the
function number related to pattern programming,
input three-figure digit number 041 and if you
do not know the number, press ENTER
key.
Then, after moving to “041:CONDNS STI” by
using direction key
, press ENTER
key.
0 4 1 : C N D N S S T I
S N U M : 4 [ S T I T C H ]
G. After inputting the number of initial condensed
sewing stitch(1~9 stitch), press ENTER
Key.
0 4 1 : C N D N S S T I
S N U M : 4 [ S T I T C H ]
E N U M : 4 [ S T I T C H ]
H. After inputting the number of final condensed
sewing stitch(1~9 stitch), press ENTER
key.
0 4 1 : C N D N S S T I
S N U M : 3 [ S T I T C H ]
E N U M : 3 [ S T I T C H ]
W I D T H : 0 1 0 [ 0 . 1 m m ]
I. After inputting condensed stitch width, if you
press EXE or ENTER
Key, input of
condensed sewing stitch is completed.
※ The stitch width of the number of stitches set
up at sewing start point(the number of initial
condensed sewing stitch) and sewing end
point(the number of end condensed sewing stitch)
is changed into condensed stitch sixth.
L I N E
X : - 0 1 6 0 A N : 0 0 0 8 0
Y : 0 0 0 3 9 A
F u n c t i o n C o d e ?
J. Confirm if the number of condensed sewing
stitch was made properly by using FORW and
BACK key.
