32
2) Pattern Data Edit Function
2-1) One Stitch Movement Function
It uses when correcting the location of one stitch in the formed sewing shape.
0 1 4 : P T R N R E A D
N O : 0 0 1
L I N E
X : - 0 0 0 1 A N : 0 0 0 5 9
Y : 0 0 0 0 0 A
F u n c t i o n C o d e ?
O R I G I N
X : 0 0 0 0 0 A N : 0 0 0 0 0
Y : 0 0 0 0 0 A
F u n c t i o n C o d e ?
A. Insert USB flash drive containing the pattern to
change movement of a stitch.
B. Press MODE key.
C. After moving to “2. Program” menu by using
direction key
, press ENTER
key. At this
time, the upper feed plate comes down and
move the original point.
D. After pressing READ key, input the pattern
number to change movement of a stitch by
moving the digit key and read in the pattern by
pressing ENTER
key. (For example, to read
pattern number 001, input [0][0][1]).
E. Go to the location of stitch to correct by using
FORW and BACK key.
< F u n c t i o n C o d e >
0 5 1 : S T I T C H D R A G <
0 5 2 : S T I T C H D E L
0 5 3 : M O V S E W S T A R
F. After pressing CODE key, if you know the
function number 051 related to pattern
programming, input three figure of digit number
and if you do not know the number, press
ENTER
key and move to “051:STITCH
DRAG”by using direction key
. Then, press
ENTER
key.
< < M a i n M e n u > >
2 . P r o g r a m
<
3 . B o b b i n W i n d
4 . M a c h i n e T e s t
Existing Location
Location Movement
New Location
< Before Location Change >
< After Location Change >
