57
0 6 6 : C h a i n C l a m p
1 . D I S A B L E < -
2 . E N A B L E
F. Input if you want an automatic operation or
manual for the change of chain number by using
direction keys
, after pressing ENTER
key. Here we change automatically.
H. After pressing ENTER
key, and press ESC
key to back to the initial screen.
0 6 5 : C h a i n S e l e c t
1 . M A N U A L
2 . A U T O < -
3 . E X T E R N A L
G. 066. Chain Clamp Setting selects up or down of
the clamp for chain work. In other words, if
user conducts a chain work having four patterns,
it is done in the order of 000, 001, 002, and 003.
If ‘1) DISABLE’is chosen, when the first
chain work of 000 is finished, it moves to 001
and the clamp ascends.
As such, when ‘1) DISABLE' is chosen, the
move to the next pattern occurs, and then the
clamp ascends.
If “2) ENABLE”is chosen, a cycle of a chain
work is completed and the chain number returns
to 000 to keep the clamp in the lifted position.
0 6 6 : C h a i n C l a m p
1 . D I S A B L E
2 . E N A B L E < -
< < M a i n M e n u > >
1 . P a r a m e t e r S e t
2 . P r o g r a m
3 . B o b b i n W i n d
(2) Correspondence of a Chain No. to a Pattern
A. Press No key. When the cursor is located on
“CHN_XX”, input [0][0]. At this time, input
less number than the number of chain sewing.
B. Press NO key. When the cursor is located on
“ NO:XXX”, input the pattern No. that
corresponds to the chain No. ″00″. For example,
if you want to work with No.“001” pattern,
input [0][0][1].
C. Press ENTER
key. Then the READY LED
comes to flicker. After reading a pattern, the
machine comes to be in sewing available mode.
D. Press ENTER
key again.
N O : 0 0 1 C H N _ _ 0 0
X S : 1 0 0 %
Y S : 1 0 0 % S P : 2 0 0 0
B C : 0 0 0 P C : 0 0 0 0
N O : 0 0 1 C H N _ _ 0 0
X S : 1 0 0 %
Y S : 1 0 0 % S P : 2 0 0 0
B C : 0 0 0 P C : 0 0 0 0
N O : 0 0 1 C H N _ _ 0 0
X S : 1 0 0 %
Y S : 1 0 0 % S P : 2 0 0 0
B C : 0 0 0 P C : 0 0 0 0
