87
J. Return to the initial screen. To create
,
input switch width by using Line key.
Second Line
I. When
is pressed, the following screen
appears. Move the cursor to ON and press
. Upon striking
,
code is created at
.
the line
the end of
line adjuster
the 3rd
ENTER
ENTER
ENTER
0 6 3 : S E T T R 3
T R 3 : O F F
O N <
T R 3 O N N O N E
X : 0 0 6 5 0 A N : 0 0 1 0 5
Y : 0 0 3 0 0 A
F u n c t i o n C o d e ?
K. Press
key and then resister
by using
key.
The feed plate moves to the set position in
accordance with the data calculation result.
EXE
Second Line
PNT.SET
L I N E N O N E
X : 0 0 6 5 0 A N : 0 0 1 2 5
Y : - 0 3 0 0 A
F u n c t i o n C o d e ?
L. To program
, press
key. Function is
63. The concerned function code is 063. If you
want to search it from the function code list,
press
and move to
with direction keys
.
063 SET TR3
ENTER
CODE
TR3
< F u n c t i o n C o d e >
0 6 3 : S E T T R 3 <
0 6 3 : S E T T R 3
T R 3 : O F F <
O N
M. When
is pressed, the following screen
appears. To cancel the
setting, move the
cursor to
and press
. At the
same time, the
is
programmed at the end of the created Line.
thread control device 3
ENTER
OFF
TR3
ENTER
T R 3 O F F N O N E
X : 0 0 6 5 0 A N : 0 0 1 2 6
Y : - 0 3 0 0 A
F u n c t i o n C o d e ?
N. Return to the initial screen.
P. If there is no problem with sewing, press
key again, and then press
key to save design.
WRITE
TEST
O. Create third and
as the way the first and second lines are created. And then press TEST to check
whether
is operating or not.
in the
. TR3 will be at
at the beginning of the
and OFF
at the
.
end of the second LINE
second LINE
ON
first LINE
TR3 is set at OFF
TR3
fourth line
