17
A. Press MODE and move to “Parameter Set”
on the Main Menu.
B. Press ENTER
to get into “Parameter
Set”. Move to “095. Safety Mode”.
< < M a i n M e n u > >
1 . P a r a m e t e r S e t
2 . P r o g r a m
3 . B o b b i n W i n d
< P a r a m e t e r S e t >
0 9 5 . S a f e t y M o d e
0 9 6 . J u m p S p e e d
0 9 7 . A u t o C a l l
10-2) Emergency Stop, Thread Sensing or Pause Code.
In order to provide maximum safety to users, when a sewing machine is stopped due to emergency stop,
thread sensing or pause code, the operation of the pedal start switch, the clamp up/down switch and
the operation box keys become disabled. When the safety mode is cancelled, the keys are enabled again
and the sewing machine operation is back to normal.
To cancel the safety function, press the “EXE”key on the left bottom of the OP Box. When this key
is pressed, the sewing machine operation will go back to normal.
When the sewing machine is stopped in relation to emergency stop, thread sensing or pause code, the
clamp takes the down position.
The safety mode can be set as follows:
C. The default value is 1) DISABLE.
0 9 5 . S a f e t y M o d e
1 ) D I S A B L E < -
2 ) E N A B L E
D. To activate the safety mode, move the cursor
to 2) ENABLE and press ENTER
.
E. If the setting is completed, the safety mode
will be enabled in time of emergency stop,
thread sensing or pause code while sewing is
conducted.
0 9 5 . S a f e t y M o d e
1 ) D I S A B L E
2 ) E N A B L E
< -
