118
Function No. : 004
Function Name : Return mode to the sewing start position
Origin
Origin
Origin
Start Position
Start Position
Start Position
Finish Position
Finish Position
Finish Position
Pattern 003
Pattern 002
Pattern 001
2
1
3
It is to set the moving mode to the sewing start position after finishing sewing operation.
It is to moves to the sewing start position through the shortest route.(Factory installed condition)
[ Contents ] It moves directly to the sewing start position without passing through
machine origin after finishing sewing operation by the shortest route.
But if it reads patterns newly, the machine moves to the sewing start
position after passing through origin.
[ Caution ]
You should set return to the machine origin after finishing sewing
operation in the function No. 002 as
‘
1) DISABLE
’
for making the above
setup available.
004. Strt Ret Mod
1) SHORTEST
Setting
Value
It is to move to the sewing start position after passing through the machine origin.
[ Contents ] The machine moves to the sewing start position after passing through
the machine origin everytime after finishing sewing.
2) ORG_TO_STR
It is to move to the sewing start position after returning to the machine origin by the
reverse tracing of sewing patterns.
[ Contents ] After finishing the sewing operation, the machine moves in reverse
according to the sewing patterns, then it passes through the machine
origin to move to the sewing start position.
3) REV_ORG_STR
Change of return method to sewing start point when using chain function
[ Contents ] In the past, when working on several patterns by using chain function,
always should pass through the original point of machine to go to sewing
start point when skipping from one pattern to another. But it reduces
working hour by enabling direct movement to sewing start point according
to setup of [Parameter 004. Strt Ret.Mod].
4) Strt Ret Mod
[ Movement after
returning to the origin ]
[ Movement after tracing
the reverse direction ]
[ Return Method when using Chain Function ]
