113
C. Move to “
” by pressing
keys
and press
key.
ENTER
direction
24.Jump Test
D. Input the time for repeating Jump transfer distance
of XY and press
key. Just press
key to conduct test with the factory-
installed setting value.
ENTER
ENTER
X - Y J u m p T e s t
D e l a y : 0 0 0 7 [ m s ]
j m p _ d x : 0 0 2 0
j m p _ d y : 0 0 2 0
E. Press
key to end Test Menu.
ESC
F. Return to the initial screen by pressing
key.
ESC
< < T e s t M e n u > >
2 4 . J u m p
T e s t
2 5 . M o t o r T y p e T e s t
2 6 . A s y n c T e s t
1-23) Communication Test between the Main Shaft Board and the CPU/IO Board (Async Test)
The communication function with the main shaft driver has been added to set up the phase stopping
position as parameter in the direct models. The test shall be done according to the following procedure.
< < M a i n M e n u > >
4 . M a c h i n e T e s t
5 . P a t t e r n L i s t
6 . E M B C a l l
A. Press
key.
MODE
B. Move to “4. Machine Test”by pressing
keys
and press
key.
ENTER
direction
1-22) Jump Test
This is used to check whether or not XY step motor is working properly and do jump test.
< < M a i n M e n u > >
4 . M a c h i n e T e s t
5 . P a t t e r n L i s t
6 . E M B C a l l
A. Press
key.
MODE
B. Move to “4 Machine Test” by using
keys
and press
key.
ENTER
direction
D. Pressing any key will go to original point and
original test automatically.
O r i g i n T e s t .
P r e s s A n y K e y
E. To end test menu, press
key.
ESC
F. Return to the initial screen by pressing
key.
ESC
