68
A. Insert USB flash drive containing the pattern to
insert overlap sewing stitch.
B. Press MODE key.
C. After moving to “2. Program” menu by using
direction key
, press ENTER
key. At this
time, the upper feed plate comes down and
moves to the original point.
O R I G I N
X : 0 0 0 0 0 A N : 0 0 0 0 0
Y : 0 0 0 0 0 A
F u n c t i o n C o d e ?
0 1 4 : P T R N R E A D
N O : 0 0 1
D. After pressing READ key, input the pattern
number to insert overlap sewing stitch by using
digit key and read in the pattern by pressing
ENTER
key. (For example, input [0][0][1] to
read the pattern number 001.)
C I R C L E
X : 0 0 0 0 0 A N : 0 0 0 3 0
Y : 0 0 1 0 0 A
F u n c t i o n C o d e ?
E. Go to the location that pattern data ends in
order to apply overlap function by using FORW
and BACK key.
< F u n c t i o n C o d e >
0 4 2 : O V L A P S T I <
0 4 3 : S Y M M E T R Y X
0 4 4 : S Y M M E T R Y Y
F. After pressing CODE key, if you know the
function number related to pattern programming,
input three-figure digit number 042 and if you
do not know the number, press ENTER
key.
Then, after moving to “042:OVLAP STI” by
using direction key
, press ENTER
key.
0 4 2 : O V L A P S T I
O V N U M : 4 [ S T I T C H ]
G. Input the number of overlap stitch to insert and
press ENTER
key.
C I R C L E
X : - 0 0 9 2 A N : 0 0 0 3 4
Y : 0 0 0 3 7 A
F u n c t i o n C o d e ?
H. Confirm if back tack was made properly by
using FORW and BACK key.
