manualshive.com logo in svg

SunStar SPS/A-Pattern Series, User Manual

Share
Download
SunStar SPS/A-Pattern Series User Manual Download Page 152

152

Function No. : 078

Function Name : Sewing limit set-up

Designed to ensure the user to increase the mechanical sewing limit of the machine as desired
SPS/C-Series can not be used.

Not in use (When shipped out from the factory)

[Contents] The sewing limit cannot be expanded.  Use the sewing limit as defined by type.

078. Sewing Limit

1) DISABLE

Setting

Value

In use 

[Contents] The user can expand the sewing limit.
[Caution] On condition that sewing limit is changed in accordance with mechanically expanded limit.

Otherwise, the machine can be damaged. 

2) ENABLE

Function No. : 079

Function Name : X-axis forward direction sewing limit set-up

The user can increase the X-axis forward direction as desired.

Set the size of X-axis forward direction as desired.  (At the time of the factory shipping,
machines are set in line with their sewing limit by type)
Ex: 13mm for 1306 type

079. XPLUS Limit

1~250mm

Setting

Value

[Contents] The user can expand the size of sewing limit in the program.
[Caution] The feeding axis must be changed in line with the size of sewing limit where

mechanical feeding is possible.  If the user increases the set-up value in the program
and begins feeding, the machine can be severely damaged. 

Function No. : 080

Function Name : X-axis reverse direction sewing limit set-up

The user can increase the X-axis reverse direction of the sewing limit

Set the size of X-axis reverse direction as desired.  (At the time of the factory shipping,
machines are set in line with their sewing limit by type)
Ex: -13mm for 1306 type

080. XMINUS Limit

-1~-250mm

Setting

Value

[Contents] The user can expand the size of sewing limit in the program.
[Caution] The feeding axis must be changed in line with the size of sewing limit where

mechanical feeding is possible.  If the user increases the set-up value in the program
and begins feeding, the machine can be severely damaged.

Summary of Contents for SPS/A-Pattern Series




































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands