31
< F u n c t i o n C o d e >
0 1 9 : L I N E Z I G <
0 2 0 : C U R V E Z I G
0 2 1 : A R C Z I G
G. Input ZigZag width by using digit key, press
ENTER
key and input ZigZag stitch width.
Then, press ENTER
key and input DIR value
by using digit key to select ZigZag shape to
create. And press ENTER
key.
H. Move ZigZag line (Ex: X: 00650 Y: 00000) to
the last sewing coordinate by using direction key
again and press PNT SET key.
F. After pressing CODE key, if you know the
function number related to pattern programming,
input three figure digit number and if you do
not know the number, press ENTER
key. Then
after moving to “019: LINE ZIG” menu by
using direction key, press ENTER
key.
J. Input thread trimmer key by pressing TRIM
key. Then “00:TRIM” screen appears for a
second and then the screen like the figure in the
right side appears again.
I. If you press EXE key, after calculation on
pattern data, feed plate moves according to the
calculated data.
K. You can confirm the shape to be actually sewed
by pressing FORW key and BACK key. Every
time you press once, it moves by one stitch and
show work mode and coordinate at the moment.
When you want to actually do initial sewing,
skip to next. If you press continuously, it moves
to the start or to the end of pattern data
consecutively.
L. Press TEST key. The upper feed plate moves to the
original point or sewing start point and goes up
and READY LED is turned on. After adjusting
appropriate initial sewing speed by pressing SPEED
key, step on the pedal switch in the right. Then, the
upper feed plate comes down and stepping on the left
pedal, it performs initial sewing. The upper feed plate
that completed initial sewing moves to the original
point or sewing start point and then goes up.
M. The order of saving and completion is the same
as the previous example.
0 1 7 : L I N E Z I G
X : 0 0 6 5 0
Y : 0 0 0 0 0
N : 0 0 1
L I N E Z I G N O N E
X : 0 0 6 5 0 A N : 0 0 0 0 0
Y : 0 0 0 0 0 A
F u n c t i o n C o d e ?
T R I M N O N E
X : 0 0 6 5 0 A N : 0 0 0 0 0
Y : 0 0 0 0 0 A
F u n c t i o n C o d e ?
L I N E Z I G N O N E
X : 0 0 6 5 0 A N : 0 0 0 0 0
Y : 0 0 0 0 0 A
F u n c t i o n C o d e ?
< T e s t S e w i n g >
S P : 1 5 0 0
0 1 0 : L I N E Z I G
W I D T H : 0 3 0 [ 0 . 1 m m ]
P I T C H : 0 3 0 [ 0 . 1 m m ]
D I R : 3 [ 0 - > 3 ]
