Sun Microsystems StorEdge T3+, Service Manual

Page: 62 / 240

3-16 Sun StorEdge T3 and T3+ Array Field Service Manual • September 2001
■
file1.bin
is acceptable
■
1file.bin
is not acceptable
■
The characters can be a combination of the following:
■
alphabetic letters
■
digits (0 through 9)
■
Special characters such as:
■
_ (underscore)
■
. (period)
■
$ (dollar symbol)
■
- (dash).
■
Names are case-sensitive. (For example,
ABC
and
abc
are different files.)
Make sure the latest firmware versions are installed and that the array configuration
information indicates that the unit is ready for operation.
Check the firmware versions and array information in a telnet session with the
array.
1. On the host, use the
telnet
command with the array name (or IP address) to
connect to the array.
For example:
2. Log in to the array by typing
root
and the supervisor password at the prompts.
The array prompt is displayed.
# telnet
array-name
Trying 23.123.123.3...
Connected to 123.123.123.3.
Escape character is ’^]’.
pSOSystem (123.123.123.3)