Sun Microsystems StorEdge T3+, Service Manual

Page: 48 / 240

3-2 Sun StorEdge T3 and T3+ Array Field Service Manual • September 2001
■
LED = Light emitting diodes on the array.
■
CM = Component Manager.
■
CLI(E) = Command-line utilities run via ethernet connection as described in Sun
StorEdge T3 and T3+ Array Administrator’s Guide.
■
CLI(S) = Command-line utilities run via a serial connection as described in
Section 2.1, “Establishing a Serial Port Connection” on page 2-1.
■
OFDG = Off-line Drive Diagnostic utility as described in Section 8.3.8, “Using the
ofdg Diagnostic Utility” on page 8-16.
■
SNMP = Simple Network Monitoring Protocol as described in Sun StorEdge T3
and T3+ Array Administrator’s Guide.
■
SNMP(CA) = Simple Network Monitoring Protocol used with a customer-written
application as described in Sun StorEdge T3 and T3+ Array Administrator’s Guide.
System (admin domain)
configuration CM, CLI(E), CLI(S)
System (admin domain)
monitoring CM, CLI(E), CLI(S), SRS, SNMP(CA), syslog(CA)
Version level check CM, CLI(E), CLI(S)
LUN configuration CM, CLI(E), CLI(S)
FRU failure monitoring LED, CM, CLI(E), CLI(S), SRS, SNMP(CA), syslog(CA)
Performance monitoring CM, CLI(E), CLI(S), SNMP(CA), syslog(CA)
Firmware download CLI(E)
Syslog access (mgmt host) CLI(E), CLI(S), syslog(CA and StorTools(M) with 2nd copy of
StorTools running on management host with ethernet
connection to disk tray
Loop resiliency check
(manual) OFDG, CLI(E), CLI(S)
Manual loop resiliency
check OFDG, CLI(E), CLI(S)
Clear supervisor password CLI(S)
Host data path diagnosis StorTools(A) application
Statistics logging syslog(CA) and StorTools(M) application with 2nd copy of
StorTools application running on management host with
Ethernet connection to disk tray
Service commands CLI(E), CLI(S)
Mfg/repair commands CLI(E), CLI(S)
TABLE 3-1
Diagnostic Functions and Tools (Continued)
Function Tools That Can Be Used