Sun Microsystems StorEdge S1 AC100, Installation And Maintenance Manual

Page: 29 / 128

Figures xxix
FIGURE 3-21
Connecting the AC Power Cable 50
FIGURE 3-22
Connecting the DC Grounding Cable 51
FIGURE 3-23
Connecting the DC Input Power Cable to the DC Connector 52
FIGURE 3-24
Disconnecting the DC Input Power Cable From the DC Connector 53
FIGURE 3-25
Locating the Chassis Ground Connection Screws 53
FIGURE 3-26
Securing the Chassis Ground Connection Screw 54
FIGURE 4-1
Removing the Front Bezel 58
FIGURE 4-2
Adding a Disk Drive 60
FIGURE 4-3
Removing and Replacing a Disk Drive 63
FIGURE 5-1
Front Panel LEDs With Bezel 67
FIGURE 5-2
Front Panel LEDs With Bezel Removed 68
FIGURE 5-3
Checking the Binary SCSI LEDs 70
FIGURE 5-4
Back Panel LEDs 72
FIGURE 5-5
Auto-termination Indication LEDs in an UltraSCSI or Wide SCSI Daisy-Chain 73
FIGURE 5-6
Auto-termination Indication LEDs in a Narrow SCSI Daisy-Chain
74
FIGURE 5-7
Removing the Front Bezel 75
FIGURE 5-8
Pulling One of the Tethers Until the Head Stops it From Coming Out 76
FIGURE 5-9
Pushing the Tether to One Side So That the Head Comes Partially Out 76
FIGURE 5-10
Pushing the Tether In the Opposite Direction 77
FIGURE 5-11
Pulling the Head of the Tether Entirely Out of the Chassis
77
FIGURE 5-12
Cleaning the Front Bezel Screen 77
FIGURE 5-13
Cleaning the Rear Fan Screens 78