Sun Microsystems StorEdge S1 AC100, Installation And Maintenance Manual

Page: 45 / 128

Chapter 1 StorEdge S1 AC100 and DC100 Overview 9
Power Switch
The StorEdge S1 storage enclosure has one rocker power switch to control the power
supply.
FIGURE 1-7
Power Switch
■
On: the power supply provides full power to the enclosure.
■
Neutral: when the switch is released from the On position, the switch returns to
the Neutral position and the power supply remains on.
■
Standby: the power supply provides standby power to the enclosure.
Caution –
Placing the power switch in the Standby position does not completely
remove power going to the enclosure. AC or DC input continues to flow to the
power supply until you disconnect the power cable from the electrical outlet.
Note –
If you remove the power cable from the system with the power switch in the
On position, full power will return to the system when you replace the cable.
SCSI ID Switch
The SCSI ID switch sets the SCSI IDs for the drives.
For more information on setting SCSI IDs, see “Setting the SCSI IDs” on page 39.
On
Standby
Neutral