Sun Microsystems StorEdge S1 AC100, Installation And Maintenance Manual

Page: 68 / 128

32 StorEdge S1 AC100 and DC100 Installation and Maintenance Manual • March 2002
3. Measure the distance between the front and back posts of your rack.
4. Adjust the slide mounts so that the distance between the front and the back
mounting ears is approximately the distance between the front and back posts of
the rack.
5. Align the slide mounts so that the end studs are in suitable post slots.
6. Tighten the M4 nuts, which hold the two halves of the slide mounts together.
7. Fasten the slide mounts to the rack using the screws supplied.
Leave the screws slightly loose to allow adjustment when the StorEdge S1 unit is
inserted. Refer to
FIGURE 3-3
for a standard 19-inch rack and
FIGURE 3-4
for a Sun
StorEdge 72-inch tall rack.
FIGURE 3-3
Fastening the Slide Mounts to the Standard 19-inch Rack