Sun Microsystems StorEdge S1 AC100, Installation And Maintenance Manual

Page: 11 / 128

Safety Agency Compliance Statements xi
SELV Compliance
Safety status of I/O connections comply to SELV requirements.
Power Cord Connection
The following caution applies only to devices with a Standby power switch:
System Unit Cover
You must remove the cover of your Sun computer system unit to add cards, memory, or internal storage devices. Be
sure to replace the top cover before powering on your computer system.
Caution – Sun products are designed to
work with single-phase power systems
having a grounded neutral conductor. To
reduce the risk of electric shock, do not plug
Sun products into any other type of power
system. Contact your facilities manager or a
qualified electrician if you are not sure what
type of power is supplied to your building.
Caution – Not all power cords have the
same current ratings. Household extension
cords do not have overload protection and
are not meant for use with computer
systems. Do not use household extension
cords with your Sun product.
Caution – Your Sun AC product is shipped
with a grounding type (three-wire) power
cord. To reduce the risk of electric shock,
always plug the cord into a grounded
power outlet.
Caution – The power switch of this product
functions as a standby type device only. The
power cord serves as the primary
disconnect device for the system. Be sure to
plug the power cord into a grounded power
outlet that is nearby the system and is
readily accessible. Do not connect the power
cord when the power supply has been
removed from the system chassis.
Caution – Do not operate Sun products
without the top cover in place. Failure to
take this precaution may result in personal
injury and system damage.