Sun Microsystems StorEdge S1 AC100, Installation And Maintenance Manual

Page: 94 / 128

58 StorEdge S1 AC100 and DC100 Installation and Maintenance Manual • March 2002
Removing the Front Bezel to Access the
Disk Drives
Before you can add or remove disk drives, you must remove the bezel from the front
of the system. To remove the bezel, do the following:
● Release the front bezel by pressing the latches on both ends and pulling the bezel
away from the enclosure (see
FIGURE 4-1
).
The bezel is tethered to the system, therefore it hangs from the front of the chassis
while you remove the disk drive.
For information about detaching the tethers from the chassis, see “To Untether the
Front Bezel and Clean the Bezel Screen” on page 75.
FIGURE 4-1
Removing the Front Bezel
microsystems
microsystems