Sun Microsystems StorEdge S1 AC100, Installation And Maintenance Manual

Page: 44 / 128

8 StorEdge S1 AC100 and DC100 Installation and Maintenance Manual • March 2002
2. Pull the right retaining lug away from the bezel so that the nameplate comes free
of the bezel (see
FIGURE 1-5
).
FIGURE 1-5
Pulling the Right Retaining Lug Away From the Bezel
▼
To Insert the Nameplate into the Bezel
● Insert the nameplate’s right retaining lug into the bezel, then gently push the left
retaining lug home.
Components at the Back of the Enclosure
FIGURE 1-6
StorEdge S1, Rear View
SCSI-3 IN port
SCSI-3 OUT port
Power connector Power switch SCSI ID switch
System and
autotermination LEDs
Fans