Sun Microsystems StorEdge S1 AC100, Installation And Maintenance Manual

Page: 71 / 128

Chapter 3 Installing the StorEdge S1 Enclosure 35
FIGURE 3-6
Adjusting the Mount and Tightening the Thumbscrew
10. Tighten the slide mount rails in the rack if you have not fully secured them yet.
11. Use a screwdriver to tighten the thumbscrews at the front of the system.
The thumbscrews secure the system in the rackmounts.
12. Hook the cable management bracket over the slide mounts at the rear of the
system. See
FIGURE 3-7
and
FIGURE 3-8
.
FIGURE 3-7
Cable Management Bracket