Subaru 2015 Outback Manual Download Page 35

Page: 35 / 610

Black plate (37,1)

一

般

Model "A2510GE-B" EDITED: 2015/ 6/ 25

involving serious injury or death.

LHD models

RHD models

1. Turn the ignition switch to the

“

”

position.

2. While the select lever is in the

“

”

position (CVT models) and the parking
brake is applied, press button

“

”

“

”

A chirp sounds and the seat moves to the
registered position.
When the seat moves to the registered
position, a chirp will sound.

NOTE

If a new position is registered for the

same button, the previously registered
seat position is deleted.

If the vehicle battery is removed, the

registered seat position is not deleted.

When the button

“

”

“

”

pressed within 45 seconds after the
driver

’

s door is opened, the registered

seat position can be retrieved even if
the ignition switch is in the

“

LOCK

”

“

OFF

”

position.

Retrieval of the seat position
registered with access key (if
equipped)

1. Hold the registered access key.

2. Unlock the driver

’

s door by pressing

the

“ ”

button or gripping the door handle.

3. Open the driver

’

s door.

A chirp sounds and the seat moves to the
registered position.
When the seat moves to the registered
position, a chirp will sound.

NOTE

If the registered seat position cannot

be retrieved after performing the pre-
vious procedures, try the following
procedures.

(1) Press the

“

SET

”

button on the

Seat, seatbelt and SRS airbags/Front seats

1-7

–

CONTINUED

–

Summary of Contents for 2015 Outback



































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Outback

Reviews:

Related manuals for 2015 Outback

Brands by name

Popular brands

Subaru 2015 Outback, Manual

Search results

Summary of Contents for 2015 Outback

Reviews:

Related manuals for 2015 Outback

Brands by name

Popular brands