Black plate (111,1)
一
般
Model "A2510GE-B" EDITED: 2015/ 6/ 25
Immobilizer
The immobilizer system is designed to
prevent an unauthorized person from
starting the engine. Only keys registered
with your vehicle
’
s immobilizer system can
be used to operate your vehicle. This
system, however, is not a 100% anti-theft
guarantee.
For models with
“
keyless access with
push-button start system
”
:
When carrying an unregistered access
key, if you press the push-button ignition
switch, the switch will not turn to the
“
ON
”
position and the engine will not start.
For models without
“
keyless access
with push-button start system
”
:
Even if an unregistered key fits into the
ignition switch and can be turned to the
“
START
”
position, the engine will auto-
matically stop after several seconds.
If the engine does not start, perform either
of the following procedures.
.
Perform the procedure described in
9-30 (models with
“
keyless access with push-button start
system
”
).
.
Pull out the key once before trying
again (models without
“
keyless access
with push-button start system
”
). Refer to
“
Ignition switch (models without push-
CAUTION
.
Do not place the key under direct
sunlight or anywhere it may
become hot.
.
Do not get the key wet. If the key
gets wet, wipe it dry with a cloth
immediately.
.
Do not modify or remove the
system. If modified or removed,
the proper operation of the sys-
tem cannot be guaranteed.
NOTE
.
To protect your vehicle from theft,
please pay close attention to the fol-
lowing security precautions:
–
Never leave your vehicle unat-
tended with its keys inside.
–
Before leaving your vehicle,
close all windows and sunroof,
and lock the doors and rear gate.
–
Do not leave spare keys or any
record of your key number in the
vehicle.
.
The vehicle has a maintenance-free
type immobilizer system.
&
Immobilizer indicator
light
Refer to
“
&
Key replacement
Your key number plate will be required if
you ever need a replacement key made.
Any new key must be registered for use
with your vehicle
’
s immobilizer system
before it can be used. The maximum
number of keys that can be registered
for use with one vehicle is as follows.
.
Four (models without
“
keyless access
with push-button start system
”
)
.
Seven (models with
“
keyless access
with push-button start system
”
)
One key that has already been registered
is required in order to register a new key.
If you lose a key, the lost key
’
s ID code still
remains in the memory of the vehicle
’
s
immobilizer system. For security reasons,
the lost key
’
s ID code should be erased
from the memory. To erase the lost key
’
s
ID code, all keys that will be used are
required.
For details about new key registration and
erasing the lost key
’
s ID code, we
recommend that you contact your
Keys and doors/Immobilizer
2-3
–
CONTINUED
–
2
