Subaru 2015 Outback Manual Download Page 298

Page: 298 / 610

Black plate (306,1)

一

般

Model "A2510GE-B" EDITED: 2015/ 6/ 25

5-74

Audio/Bluetooth

settings

WARNING

Do not operate the player

’

s controls

or connect the portable audio device
while driving.

CAUTION

Do not leave portable audio de-

vice in the vehicle. The tempera-
ture inside the vehicle may be-
come high, resulting in damage
to the player.

Do not push down on or apply

unnecessary pressure to the por-
table audio device while it is
connected as this may damage
the portable audio device or its
terminal.

Do not insert foreign objects into

the port as this may damage the
portable audio device or its term-
inal.

Bluetooth

settings

Registering/connecting
Bluetooth

device

The Bluetooth

word mark and logos are

registered trademarks owned by Bluetooth
SIG, Inc.

Registering a Bluetooth phone for
the first time

To use the hands-free system, it is
necessary to register a Bluetooth phone
with the system.

Once the phone has been registered, it is
possible to use the hands-free system.

This operation cannot be performed while
driving.

For details about registering a Bluetooth
device: Refer to

“

Registering a Bluetooth

device

”

5-77.

1. Turn the Bluetooth connection setting
of your cellular phone on.

This function is not available when

Bluetooth connection setting of your
cellular phone is set to off.

2. Select

and select

SETTINGS

(SETTINGS) to display the SETTINGS

screen.
For Europe:

Except for Europe:

Settings (When selecting the

“

”

tab)

3. To register a device, select

“

Add

”

“

BT Devices Connection

”

Summary of Contents for 2015 Outback



































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Outback

Reviews:

Related manuals for 2015 Outback

Brands by name

Popular brands

Subaru 2015 Outback, Manual

Search results

Summary of Contents for 2015 Outback

Reviews:

Related manuals for 2015 Outback

Brands by name

Popular brands