Subaru 2015 Outback Manual Download Page 272

Page: 272 / 610

Black plate (280,1)

一

般

Model "A2510GE-B" EDITED: 2015/ 6/ 25

5-48

Audio/Media operation

Control screen (Trick Play) (for Europe, for Australia)

Left: Audio CD, Right: MP3/WMA/AAC disc

Control screen (Trick Play) (except for Europe)

Left: Audio CD, Right: MP3/WMA/AAC disc

No.

Function

Select to start 1 Track Repeat.

Select to start Repeat All.

Select to start Shuffle All.

Return to the control screen.

Select to start Folder Repeat.

Select to start Shuffle Folder.

NOTE

If a disc contains CD-DA files and

MP3/WMA/AAC files, only the CD-DA
files can be played back.

If a CD-TEXT disc is inserted, the

title of the disc and track will be
displayed. Up to 32 characters can be
displayed.

If the disc contains no CD-TEXT,

only the track number would be dis-
played on the screen.

If you press the

“

Mute

”

switch on

the steering wheel during playback, the
track pauses. If you press the

“

Mute

”

switch once again, the playback will
resume.

Summary of Contents for 2015 Outback



































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Outback

Reviews:

Related manuals for 2015 Outback

Brands by name

Popular brands

Subaru 2015 Outback, Manual

Search results

Summary of Contents for 2015 Outback

Reviews:

Related manuals for 2015 Outback

Brands by name

Popular brands