Subaru 2015 Outback Manual Download Page 445 | Manualshive

Page: 445 / 610

background image

Black plate (459,1)

一

般

Model "A2510GE-B" EDITED: 2015/ 6/ 25

WARNING

.

Do not use the flat tire repair kit in

the following cases.

–

The tire has already been
damaged as a result of being
driven in the under inflated
condition.

–

The tire damage is not located

within the visible tread of the
tire.

–

The tire damage is on the
sidewall of the tire.

–

When the tire has been taken

off of the wheel.

–

The wheel of the flat tire is

damaged.

–

Two or more tires have been

punctured.

–

The expiration date of the
sealant has passed.

.

When inflating the flat tire, if the

tire inflation pressure does not
reach 180 kPa (1.8 kgf/cm

2

, 26

psi) within 10 minutes, do not
continue to seal the tire. We
recommend that you contact
your SUBARU dealer.

.

Drive with caution and avoid

making sudden steering or driv-

ing maneuvers.

.

Do not exceed a maximum speed

of 80 km/h (50 mph).

.

Do not exceed a maximum driv-

ing distance of 200 km (125
miles).

.

Do not use tire chains on a sealed

tire.

.

Do not tow a trailer.

.

If used for a purpose other than

sealing a flat tire, the flat tire
repair kit may cause a severe
accident or injury due to the fact
that compressed air can act as
an explosive or propellant.

.

Safely park your vehicle on the

roadside so that you do not
obstruct the flow of traffic and
so that you are able to seal the
flat tire without being in danger.

.

Apply the parking brake, even if

the vehicle is parked on a level
road, to make sure that the
vehicle will not move.

.

Stop the engine before sealing

the flat tire.

.

Turn on the hazard warning

flasher while sealing the flat tire.

.

Do not attempt to remove foreign

objects like nails or screws that

have penetrated the tire. Leave
them as they are.

.

Never leave the flat tire repair kit

unattended while in use.

CAUTION

.

Remember that the flat tire repair

kit only provides temporary mo-
bility. Regulations concerning
tire repair after usage of flat tire
repair kit may differ from country
to country. We recommend that
you consult your SUBARU dealer
or tire dealer for advice.

.

Store the flat tire repair kit safely

and secure it in the cargo area.
Storing it anywhere in the pas-
senger compartment is not advi-
sable because it could strike an
occupant in the event of a sud-
den stop or collision and cause
injury.

.

Use the flat tire repair kit with

original vehicle tires only.

.

Do not keep the compressor

operating for more than 10 min-
utes, otherwise there is a risk of it
overheating.

In case of emergency/Flat tires

9-11

–

CONTINUED

–

9

«
...
443
444
445
446
447
...
»

Summary of Contents for 2015 Outback



































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2015 Outback

Brand: UMBRA RIMORCHI Pages: 18

Brand: FormFit Pages: 4

Brand: Trailboss Pages: 8

Brand: kincrome Pages: 6

Brand: TATA Motors Pages: 166

Brand: Advanced Diagnostics Pages: 10

Brand: Lexus Pages: 830

CHALLENGER GK-6125A 2018

Brand: Coolster Pages: 45

Brand: Kargo Master Pages: 18

Pro Competition

Brand: G-Tech Pages: 180

Brand: Prorack Pages: 14

Brand: Subaru Pages: 9

Brand: Maserati Pages: 288

Brand: LAS Pages: 44

Brand: Canyon Pages: 2

Brand: Huawei Pages: 19

Brand: Motorola Pages: 28

Brand: Bosch Pages: 33

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands