Black plate (195,1)
一
般
Model "A2510GE-B" EDITED: 2015/ 6/ 25
!
Screen Settings
After entering the
“
Screen Settings
”
menu,
select one of the following menus.
!
Welcome Screen
The welcome screen can be activated or
deactivated. Select
“
On (with Sound)
”
to
activate the screen and sound. Select
“
On
(without Sound)
”
to activate the screen
and deactivate the sound. Select
“
Off
”
to
deactivate the screen.
!
Good-bye Screen
The Good-bye screen can be activated or
deactivated. Select
“
On
”
to activate the
screen. Select
“
Off
”
to deactivate the
screen.
!
Gauge Initial Movement
The movement of the meter needles and
gauge needles that occurs when the
ignition switch is turned to the
“
ON
”
position can be activated or deactivated.
Select
“
On
”
to activate. Select
“
Off
”
to
deactivate.
!
Gear Position Indicator Settings
(MT models)
The gear position indicator light can be
activated or deactivated. Select
“
On
”
to
activate. Select
“
Off
”
to deactivate.
!
Units (U.K. models)
You can select the displayed units of the
distance, vehicle speed and volume.
Operate the
“ ”
or
“ ”
switch on the
steering wheel to display the preferred
units. Then pull the
“
/SET
”
switch to
select the displayed units.
!
Languages
Operate the
“ ”
or
“ ”
switch on the
steering wheel to display the preferred
language. Then pull the
“
/SET
”
switch to
select the displayed language.
!
Combination Meter Illumination (if
equipped)
After entering the
“
Combination Meter
Illumination
”
menu, select the following
menu.
!
Meter Ring Illumination
The illumination of the combination meter
rings can be activated or deactivated.
Select
“
On
”
to activate the illumination.
Select
“
Off
”
to deactivate the illumination.
!
SI-DRIVE Indication
You can activate or deactivate the indica-
tion of the SI-DRIVE mode. Select
“
On
”
to
activate the indication. Select
“
Off
”
to
deactivate the indication.
!
Manual Mode Indication
You can activate or deactivate the gear
position indicator. Select
“
On
”
to activate
the indication. Select
“
Off
”
to deactivate
the indication.
!
Illumination Color Selection
You can change the illumination color of
the combination meter. Select the pre-
ferred color (No. 1 to No. 10).
!
EyeSight (models with EyeSight
system)
NOTE
For models with the EyeSight system,
refer to the Owner
’
s Manual supple-
ment for the EyeSight system.
After entering the
“
EyeSight
”
menu, select
one of the following menus.
!
Warning Volume
The volume of the warning buzzer that
sounds when the EyeSight system is in
use can be set in 3 stages (
“
Max
”
,
“
Mid
”
and
“
Min
”
).
!
Lead Vehicle Acquisition Sound
When adaptive cruise control is used, the
buzzer that sounds under any of the
following conditions can be activated or
deactivated.
.
A vehicle is detected in front
Instruments and controls/Multi information display
3-45
–
CONTINUED
–
3
