Subaru 2015 Outback Manual Download Page 184

Page: 184 / 610

Black plate (189,1)

一

般

Model "A2510GE-B" EDITED: 2015/ 6/ 25

Icy road surface warning screen

When the outside temperature becomes
3

C (37

F) or less, the icy road surface

warning screen interrupts to inform the
driver that the road surface may be frozen.

NOTE

The outside temperature indicator

shows the temperature around the
sensor. Therefore, the temperature in-
dication may differ from the actual
outside air temperature.

The icy road surface warning screen

should be treated only as a guide. Be
sure to check the condition of the road
surface before driving.

Once the icy road surface warning

screen appears, it will not disappear
unless the outside temperature has

increased to 5

C (41

F) or higher.

Basic screens

By operating the

“ ”

switch on the

steering wheel, you can change the
screen that is always displayed.

Default screen:

Average fuel consumption screen:

: Fuel consumption
: Driving range on remaining fuel

This screen displays the average rate of fuel
consumption since the trip meter was last
reset.

Instruments and controls/Multi information display

3-39

–

CONTINUED

–

Summary of Contents for 2015 Outback



































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Outback

Reviews:

Related manuals for 2015 Outback

Brands by name

Popular brands

Subaru 2015 Outback, Manual

Search results

Summary of Contents for 2015 Outback

Reviews:

Related manuals for 2015 Outback

Brands by name

Popular brands