Subaru 2015 Outback Manual Download Page 307

Page: 307 / 610

Black plate (315,1)

一

般

Model "A2510GE-B" EDITED: 2015/ 6/ 25

tion under the influence of radio
waves. Radio waves could have
unexpected effects on the opera-
tion of such medical devices.

CAUTION

Do not leave your cellular phone in
the vehicle. The temperature inside
may rise to a level that could
damage the phone.

NOTE

If your cellular phone does not

support Bluetooth, this system cannot
function.

In the following conditions, the sys-

tem may not function:

–

The cellular phone is turned off.

–

The current position is outside

the communication area.

–

The cellular phone is not con-

nected.

–

The cellular phone has a low

battery.

When using the hands free function

and other Bluetooth functions at the
same time, the following problems may
occur:

–

The Bluetooth connection may

be cut.

–

Noise may be heard when play-

ing back voice with the Bluetooth
function.

Registering/connecting a Bluetooth
phone

To use the hands-free system for cellular
phones, it is necessary to register a
cellular phone with the system. Refer to

“

Registering/connecting Bluetooth

Bluetooth phone condition dis-
play

The condition of the Bluetooth phone
appears on the upper right side of the
screen. Refer to

“

Bluetooth phone condi-

tion display

”

5-83.

Using the phone switch/micro-
phone

Steering switch
By pressing the phone switch, a call can
be received or ended without taking your
hands off the steering wheel.

Volume control switch

Press the

“

”

side to increase the

volume.

Press the

“

”

side to decrease the

volume.

Off hook switch

On hook switch

Microphone
The microphone is used when talking on
the phone.

Audio/Phone operation (Hands

–

free system for cellular phones)

5-83

–

CONTINUED

–

Summary of Contents for 2015 Outback



































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Outback

Reviews:

Related manuals for 2015 Outback

Brands by name

Popular brands

Subaru 2015 Outback, Manual

Search results

Summary of Contents for 2015 Outback

Reviews:

Related manuals for 2015 Outback

Brands by name

Popular brands