Black plate (62,1)
一
般
Model "A2510GE-B" EDITED: 2015/ 6/ 25
1-32
Seat, seatbelt and SRS airbags/Child restraint systems
.
Do not place the head restraint
that has been removed in the
passenger compartment to pre-
vent it from being thrown around
in the passenger compartment in
a sudden stop or a sharp turn.
!
Required conditions
When you install a child restraint system
to the passenger
’
s seat, be sure that all of
the following required conditions are met.
.
The passenger
’
s seat is adjusted as
follows.
1)
Seat position: fully rearward position
2)
Seat cushion height: highest position
(models with seat cushion height adjust-
ment)
3)
Seatback reclining: most upright position
.
The front passenger
’
s frontal airbag
ON indicator is off.
1)
Front passenger
’
s frontal airbag OFF
indicator
2)
Front passenger
’
s frontal airbag ON
indicator
Depending on the type and/or form of the
child restraint system, and the child
’
s
weight, the front passenger
’
s frontal air-
bag ON indicator may not turn off. In this
case, install the child restraint system to a
rear seating position. For details about the
front passenger
’
s frontal airbag ON indi-
cator, refer to
“
.
The child restraint system does not
contact the head restraint. If the child
restraint system makes contact with the
head restraint, raise the head restraint to
