Subaru 2015 Outback Manual Download Page 150

Page: 150 / 610

Black plate (155,1)

一

般

Model "A2510GE-B" EDITED: 2015/ 6/ 25

The light gradually turns off under the
following conditions.

when the ignition switch is turned to the

“

”

position

when the doors are locked using the

remote keyless entry transmitter

Push-button ignition switch
(models with push-button
start system)

Safety precautions

Refer to

“

Safety precautions

”

2-8.

Operating range for push-
button start system

Sedan

Antenna

Operating range

Outback

Antenna

Operating range

NOTE

If the access key is not detected

within the operating range of the an-
tennas inside the vehicle, the push-
button ignition switch and the engine
start cannot be operated.

Even when the access key is outside

the vehicle, if it is placed too close to
the glass, it may be possible to switch
the power or to start the engine.

Do not leave the access key in the

following places. It may become im-
possible to operate the push-button
ignition switch and the engine start.

–

On the instrument panel

Instruments and controls/Push

–

button ignition switch (models with push

–

button start system)

3-5

–

CONTINUED

–

Summary of Contents for 2015 Outback



































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Outback

Reviews:

Related manuals for 2015 Outback

Brands by name

Popular brands

Subaru 2015 Outback, Manual

Search results

Summary of Contents for 2015 Outback

Reviews:

Related manuals for 2015 Outback

Brands by name

Popular brands