Subaru 2015 Outback Manual Download Page 185

Page: 185 / 610

Black plate (190,1)

一

般

Model "A2510GE-B" EDITED: 2015/ 6/ 25

3-40

Instruments and controls/Multi information display

Current fuel consumption screen:

: Fuel consumption
: Driving range on remaining fuel

This screen displays the rate of fuel con-
sumption at the present moment.

Driving information screen:

: Journey time
: Journey distance

This screen displays the journey time (the
time that has elapsed since the ignition switch
was turned to the

“

”

position) and journey

distance (the distance that has been driven
since the ignition switch was turned to the

“

”

position).

Digital speed screen:

This screen displays the current vehicle
speed.

SI-DRIVE mode screen:

This screen indicates the current SI-DRIVE
mode with its throttle angle.

Summary of Contents for 2015 Outback



































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Outback

Reviews:

Related manuals for 2015 Outback

Brands by name

Popular brands

Subaru 2015 Outback, Manual

Search results

Summary of Contents for 2015 Outback

Reviews:

Related manuals for 2015 Outback

Brands by name

Popular brands