Subaru 2015 Outback, Manual

Page: 151 / 610

Black plate (156,1)
一 般
Model "A2510GE-B" EDITED: 2015/ 6/ 25
3-6
Instruments and controls/Push
–
button ignition switch (models with push
–
button start system)
–
On the floor
–
Inside the glove box
–
Inside the door trim pocket
–
On the rear seat
–
On the rear shelf (Sedan)
–
Inside the trunk (Sedan)
–
At the corner of the cargo area
(Outback)
.
When operating the push-button
ignition switch or starting the engine,
if the access key battery is discharged,
perform the procedure described in
“
Access key
–
if access key does not
operate properly
” F
9-29. In such a
case, replace the battery immediately.
Refer to
“
Replacing battery of access
key
” F
11-61.
&
Switching power
Left-hand drive models
1) Operation indicator
2) Push-button ignition switch
Right-hand drive models
1) Operation indicator
2) Push-button ignition switch
The power is switched every time the
push-button ignition switch is pressed.
1. Carry the access key, and sit in the
driver
’
s seat.
2. Shift the shift lever into neutral (MT
models) or the select lever into the
“
P
”
position (CVT models).
3. Press the push-button ignition switch
without depressing the clutch pedal (MT
models) or the brake pedal (CVT models).
Every time the button is pressed, the
power is switched in the sequence of
“
OFF
”
,
“
ACC
”
,
“
ON
”
and
“
OFF
”
. When the
engine is stopped and the push-button
ignition switch is in
“
ACC
”
or
“
ON
”
, the
operation indicator on the push-button