Subaru 2015 Outback Manual Download Page 232

Page: 232 / 610

Black plate (240,1)

一

般

Model "A2510GE-B" EDITED: 2015/ 6/ 25

5-8

Audio/Basic information before use

Loading and unloading a disc

Loading a disc

CAUTION

Never try to disassemble the audio
kit or lubricate any part of the CD
player. Do not insert anything other
than a disc into the slot.

1. Insert a disc into the disc slot.

After insertion, the disc is automati-

cally loaded.

NOTE

For compatible discs, refer to

“

player and disc

”

5-26.

When inserting a disc, gently insert

it with the label facing up.

Unloading a disc

1. Press

and remove the disc.

Connecting and disconnect-
ing a USB memory/portable
device

Connecting a device

1. Open the cover and connect a device.

Turn on the power of the device

when it is not turned on.

NOTE

This unit does not support commer-

cially available USB hubs.

This device has a USB port for USB

memory/portable device.

For compatible USB memory de-

vices, refer to

“

USB memory device

”

5-28.

For compatible iPod models, refer to

Summary of Contents for 2015 Outback



































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Outback

Reviews:

Related manuals for 2015 Outback

Brands by name

Popular brands

Subaru 2015 Outback, Manual

Search results

Summary of Contents for 2015 Outback

Reviews:

Related manuals for 2015 Outback

Brands by name

Popular brands