Black plate (93,1)
一
般
Model "A2510GE-B" EDITED: 2015/ 6/ 25
!
SRS frontal airbag operation
A)
Driver
’
s side
B)
Passenger
’
s side
1)
SRS AIRBAGs deploy as soon as a collision occurs.
2)
After deployment, SRS AIRBAGs start to deflate immediately so that the driver
’
s vision is not
obstructed.
If the following sensors detect a certain
predetermined amount of force during a
frontal collision, the control module sends
signals to the frontal airbag modules
instructing them to inflate the SRS frontal
airbags.
.
the front sub sensors located on both
the right and left sides at the front of the
vehicle
.
the impact sensor in the airbag control
module
Then both airbag modules produce gas,
which instantly inflates driver
’
s and pas-
senger
’
s SRS frontal airbags.
After deployment, the SRS airbags im-
mediately start to deflate so that the
driver
’
s vision is not obstructed and the
driver
’
s ability to maintain control of the
vehicle is not interfered. The time required
from detecting impact to the deflation of
the SRS airbag after deployment is short-
er than the blink of an eye.
If the vehicle is equipped with the occu-
pant detection system for the front pas-
senger
’
s seat, the SRS system detects
whether the front passenger
’
s seat is
occupied by a passenger or not. If the
seat is not occupied, the system does not
inflate the front passenger
’
s SRS airbag.
The SRS frontal airbag is designed as
Seat, seatbelt and SRS airbags/*SRS airbag (Supplemental Restraint System airbag)
1-63
–
CONTINUED
–
1
