Black plate (67,1)
一
般
Model "A2510GE-B" EDITED: 2015/ 6/ 25
4. Run the lap and shoulder belt through
or around the child restraint system
following the instructions provided by its
manufacturer.
5. Insert the tongue plate into the buckle
until you hear a click.
6. Take up the slack in the lap belt.
7. Pull out the seatbelt fully from the
retractor to change the retractor over from
the Emergency Locking Retractor (ELR)
to the Automatic Locking Retractor (ALR)
mode. Then, allow the belt to rewind into
the retractor. As the belt is rewinding,
clicks will be heard which indicate the
retractor functions as ALR.
NOTE
For details about the ALR mode, refer
to
Automatic Locking Retractor/Emer-
gency Locking Retractor (ALR/ELR)
8. Before having a child sit in the child
restraint system, try to move it back and
forth and right and left to check that it is
firmly secured in the center of the seat.
Sometimes a child restraint can be more
firmly secured by pushing it down into the
seat cushion and then tightening the
seatbelt.
9. Pull at the shoulder portion of the belt
to confirm that it cannot be pulled out (ALR
properly functioning).
Sedan
Seat, seatbelt and SRS airbags/Child restraint systems
1-37
–
CONTINUED
–
1
