Subaru 2015 Outback Manual Download Page 536

Page: 536 / 610

Black plate (553,1)

一

般

Model "A2510GE-B" EDITED: 2015/ 6/ 25

type.

Batteries shall not be exposed to

excessive heat such as sun-
shine, fire or the like.

NOTE

Replace only with the same or

equivalent type of battery recom-
mended by the manufacturer.

Dispose of used batteries according

to the local laws.

Mount the battery in the correct

orientation to prevent fluid leakage.
Be careful not to bend the terminals. It
may result in a malfunction.

It is recommended that the battery

should be replaced by a SUBARU
dealer.

Use a new battery.

After replacing the battery, confirm

that the access key/transmitter func-
tions properly.

Replacing battery of access
key

CAUTION

When removing or fitting the access
key cover, make sure that the plastic
part does not come off or become
misaligned.

Battery: Button battery CR2032

Release button

Mechanical key

1. Take out the mechanical key.

2. Wrap a flat-head screwdriver with vinyl
tape or a cloth, and insert it in the gap to
remove the cover.

3. Take out the battery using a flat-head
screwdriver with vinyl tape or a cloth.

Maintenance and service/Replacing battery

11-61

–

CONTINUED

–

Summary of Contents for 2015 Outback



































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Outback

Reviews:

Related manuals for 2015 Outback

Brands by name

Popular brands

Subaru 2015 Outback, Manual

Search results

Summary of Contents for 2015 Outback

Reviews:

Related manuals for 2015 Outback

Brands by name

Popular brands