Subaru 2015 Outback, Manual

Page: 134 / 610

Black plate (138,1)
一 般
Model "A2510GE-B" EDITED: 2015/ 6/ 25
2-30
Keys and doors/Windows
!
Operating the window
1) Automatically open/close (if equipped)
2) Open/close
To open:
Push the switch down lightly and hold it.
The window will open as long as the
switch is held.
For some models, this switch also has a
one-touch auto down feature that allows
the window to be opened fully without
holding the switch.
Push the switch down until it clicks and
release it, and the window will fully open.
To stop the window halfway, pull the
switch up lightly.
To close:
Pull the switch up lightly and hold it. The
window will close as long as the switch is
held.
For some models, this switch also has a
one-touch auto up feature that allows the
window to be closed fully without holding
the switch.
Pull the switch up until it clicks and release
it, and the window will fully close. To stop
the window halfway, push the switch down
lightly.
NOTE
For models with the one-touch auto up/
down feature, if the vehicle
’
s battery is
disconnected due to situations such as
battery or fuse replacement, the one-
touch auto up/down function will be
deactivated. Initialize the power win-
dow to reactivate the one-touch auto
up/down function. Refer to
“
Initializa-
tion of power window
” F
2-31.
!
Anti-entrapment function (models
with the one-touch auto up/down
feature)
CAUTION
.
Never attempt to test this func-
tion using fingers, hands or other
parts of your body.
.
The anti-entrapment function
may not operate properly if some
object gets trapped just before
the window fully closes.
NOTE
.
If a window detects an impact simi-
lar to that caused by trapping an object
(for example, when the vehicle encoun-
ters a deep pothole), the anti-entrap-
ment function may operate.
.
The window cannot be operated for
a few seconds after the anti-entrap-
ment function operates.
.
If the vehicle
’
s battery is discon-
nected due to situations such as
battery or fuse replacement, the anti-
entrapment function is deactivated.
Initialize the power window to reacti-
vate the anti-entrapment function. Re-
fer to
“
Initialization of power window
”
F
2-31.
While closing with the one-touch auto up
feature, if the window senses a substantial
enough object trapped between the win-
dow and the window frame, it automati-
cally moves down slightly and stops.